100K ohm NTC 3950 Thermistors Sensors with Cable 3D Printers Parts Temperature Part White 1M Line Accessories
 
What is a 100K thermistor? The 3950 NTC Thermistor is a thermally sensitive resistor and the special feature of the 100K ohm thermistor is that they exhibit a large change in resistance with only a small temperature change. The thermistor is ideal for use as a temperature sensor in 3D printers such as the Reprap
 
The improvements compared to the other NTC 3950 100k thermistors in the market.
- Upgrade from the original ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement.
 
- The temperature measurement range is increased from -40 ℃~ +300℃. It helps a lot to print high-temperature filament, can replace the original K-type thermocouple temperature. If need to print high-temperature filament, 100K thermistors are highly recommended for your 3D printers.
 
- The new version of 100k thermistor ensure the maximum service life with precision temperature measurement.
 
- NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
 
- Can be used with the new version of the heater
 
Spec:
● Small Size: 1.25mmx2.0mm glass bead
● High accuracy: ±1%
● Resistance value at 25°C=100K
● Wiring insulation: high temperature teflon/PTFE
● Wiring length: 1 meter
● Operating temperature range: -40 ° C ... + 300 ° C
● Dissipation power factor: ≥ 5MW / ° C (static air)
● Rated power: 45MW
● Thermal time constant ≤ 7S (static air)
● Temperature Coefficient of Resistance; -2-5% / ° C
 
Included:
1x NTC Thermistor 3950 100k